XP работа с камерами.
Компьютер время от времени отказывается работать с камерами. (вэбкамера Genius, фотокамера Sony Cyber-shot). Пишет что устройство не опознано (Sony Cyber-shot)после долгих манипуляций с камерой все же распознает устройство, или происходит(в основном с вэбкамерой) сбой и на синем фоне выскакивает сообщение:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you`ve seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disabled components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical information:
*** STOP: 0x0000007E (0xC0000005, 0xF7B5FCB6, 0xF7C7A92C, 0xF7C7A628)
***ALIMMSIF.SYS – Address F7B5FCB6 base at F7B5F000, DateStamp 3dbf8bf2
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.
Что с этим можно сделать?
Прошу оставлять комментарии и предложения по существу вопроса.
Компьютер время от времени отказывается работать с камерами. (вэбкамера Genius, фотокамера Sony Cyber-shot). Пишет что устройство не опознано (Sony Cyber-shot)после долгих манипуляций с камерой все же распознает устройство, или происходит(в основном с вэбкамерой) сбой и на синем фоне выскакивает сообщение:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you`ve seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disabled components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical information:
*** STOP: 0x0000007E (0xC0000005, 0xF7B5FCB6, 0xF7C7A92C, 0xF7C7A628)
***ALIMMSIF.SYS – Address F7B5FCB6 base at F7B5F000, DateStamp 3dbf8bf2
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.
Что с этим можно сделать?
Прошу оставлять комментарии и предложения по существу вопроса.