gagarin612
Ученик
- Регистрация
- 29 Дек 2009
- Сообщения
- 4
- Реакции
- 0
- Баллы
- 0
Не могу переустановить ХР
Здрасти пожалуста помогите проблема вот в чем:
при установке Windows XP SP 3 версия 5.1 сборка 2600.xpsp_sp3_qfe.080814-1300 загрузился с загрузочного диска потом отформатировал диск С на который устанавливал систему потом установил с диска потом перезагрузил и устанавливал с винта далее появилось окно с полосой загрузки и при "установке оборудования" комп выдал синий экран с надписью:
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you have seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a drivers identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapter.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced sturtup options, and then select Safe Mode.
Technical information:
*** STOP: 0x0000007E (0xC0000005,0xF6B0546D,0xF7C58A74,0xF7C58770)
*** portcls.sys - Address F6B0546D base at F6B05000, DateStamp 48025ccc
Beginning dump of phisical memory.
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.
На установочном диске написано samlab ноябрь 2008
Ваше технарское мнение?
Здрасти пожалуста помогите проблема вот в чем:
при установке Windows XP SP 3 версия 5.1 сборка 2600.xpsp_sp3_qfe.080814-1300 загрузился с загрузочного диска потом отформатировал диск С на который устанавливал систему потом установил с диска потом перезагрузил и устанавливал с винта далее появилось окно с полосой загрузки и при "установке оборудования" комп выдал синий экран с надписью:
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you have seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a drivers identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapter.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced sturtup options, and then select Safe Mode.
Technical information:
*** STOP: 0x0000007E (0xC0000005,0xF6B0546D,0xF7C58A74,0xF7C58770)
*** portcls.sys - Address F6B0546D base at F6B05000, DateStamp 48025ccc
Beginning dump of phisical memory.
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.
На установочном диске написано samlab ноябрь 2008
Ваше технарское мнение?